描述

Mercury Gas Cooler for XC-6000 Sorbent Trap Monitoring System

The Apex Instruments TEC-4000Hg Thermoelectric Gas Cooler is a 19-inch rack-mounted gas cooler designed to be used in conjunction with the XC-6000EM MercSampler Console.

The sample gas is cooled for the purpose of condensing the water vapor and water-soluble acids prior to measurement with the metering console. The condensate is collected in plastic-coated reagent bottles connected to the bottom of the condensers. The condensate freely drains into the bottles without the need of a pump. Dry acid-free sample gas is crucial for protecting the sample pumps and measurement devices.

当在500ccm时抽样时，瓶子的范围为从源的源从20％的水分收集一周的冷凝物。

可以测量冷凝物以确定根据EPA方法4确定近似百分比的水蒸气。

Gases are drawn through a dry sorbet scrubber for removing residual water vapor and corrosive gases.

Pinnacle冷却技术

The TEC-4000Hg uses the Apex state-of-the-art Pinnacle Heat Pump for cooling the sample gas to remove moisture from the sample. The Pinnacle solid-state heat pump is housed in a rugged package that is easy to service and designed to withstand harsh manufacturing environments.

特征：

• Extremely reliable solid-state heat pump with a long life span
• Low-resistance heat exchanger with a copper base and heat pipes with high thermal conductivity

The Pinnacle heat pump unit includes an aluminum block fitted with two Hastelloy condensers, a thermoelectric module, a high-efficiency heat exchanger, an exhaust fan, and a PID temperature controller.

Moisture is removed by condensation through the reduction of the dew point, which happens when the gas is cooled so that the water vapor is less than 1% by volume. Water vapor and acid gases are condensed to prevent corrosion in the system.

The heat pump uses an extremely reliable rugged solid-state thermoelectric module (TEC) and low-resistance heat exchanger with a copper base and heat pipes with high thermal conductivity for removing heat from the hot side of the TEC and dispersing the heat to the surrounding environment via the exhaust fan.

For maximum performance, the thermoelectric module is coupled with a highly efficient heat exchanger for removing the heat from the hot side of the module to the ambient air. The heat exchanger includes a copper base fitted with six U-tube heat pipes with coated fins and a high-volume corrosion-resistant fan.

我们选择了声子热electric modules because we believe that they offer the most advanced and innovative thermoelectric modules on the market.

---

Specifications:

冷藏：热电热泵：50瓦固态模块

Temperature display: OLED display +/- 0.1 ºC/ºF

温度控制：具有PIDControl，3-BeartKykad的可变直流电流

Cooling capacity：100 BTU / HR

Cold block: Insulated aluminum

Condenser: Reverse flow condensate separator, C276 alloy, 1×7 inch dimensions, 4-inch active cooling zone

Condensate removal：重力瓶，10ml / min

热交换器: Low-profile heatsink with six 6-mm diameter U-tube heat-pipes, coated fins for corrosion resistance, 120-mm axial fan, with encapsulated motor and electronics

额定流量：每条通道2磅湿度

Ambient operating temperature: 32 to 104 ºF. (0 to 40 ºC)

Auxiliary temperature controller：用于加热跳线的数字温度控制器，Type-K热电偶输入

Power: Supply 120V AC at 60 Hz 15 amps max., or 240VAC at 50 Hz 10 amps max., IEC C-13 inlet

Dimensions：17 x 7 x 17英寸（43.2cm x 27.8cm x43.2cm）

Weight：22磅（10千克）